NEWS CATEGORIES

Industry news

Surveillance camera installation steps

Author:　ComeFrom:　Date:2020-12-8 19:53:24　Hits:1201
Step 1: Take out the bracket and prepare the tools and parts: necessary tools such as plugs, screws, screwdrivers, small hammers, electric drills; check the size and model of the plugs and self-tapping screws according to the pre-determined installation position Test whether the screws of the bracket and the screw holes of the camera base are suitable, whether the pre-buried pipeline interface is handled well, and whether the test cable is unblocked, and then enter the installation procedure when it is ready.
Step 2: Take out the camera, carefully install the lens according to the pre-determined model and specifications of the camera lens (the infrared integrated camera does not need to install the lens), be careful not to touch the lens and CCD with your hands to confirm that it is firmly fixed, and then turn on the power. Connect the host computer or use a monitor, small TV, etc. on site to adjust the aperture and focal length.
Step 3: Take out the brackets, plugs, screws, screwdrivers, small hammers, electric drills and other tools, and install the brackets according to the pre-determined positions. After checking for firmness, install the camera in the agreed direction;
Step 4: If you need to install the shield, after the second step, start installing the shield directly from here.
1. Open the upper cover and rear baffle of the shield;
2. Pull out the fixing metal sheet and fix the camera;
3. Put the power adapter into the shield;
4. Reset the upper cover and rear baffle, straighten out the cables, fix them, and install them on the brackets.
Step 5: Insert the soldered BNC plug of the video cable into the socket of the video cable and confirm that it is firmly fixed.
Step 6: Insert the power output plug of the power adapter into the power socket of the surveillance camera, and confirm the firmness.
Step 7: Connect the other end of the cable to the control host or monitor (TV) and make sure it is firm.
Step 8: Connect the power of the monitoring host and the camera, and adjust the camera angle to the predetermined range through the monitor.
Previous:Surveillance camera buying skills